Schlage F/FA Series Entrance Handles
 
  • F/FA Series Handles
  • Handle Specifcations (All)
Do you need dummy handles, split finishes or just a standard handle set?  Over the next few screens the Entrance Handle Wizard will ask you a series of easy-to-answer questions.  And at the end the wizard will present a list of the items that you'll need to complete your order.  You will be able to order different finishes and interior handles than those shown below.
Click on desired picture or radio button
Schlage F Series Handles Schlage FA Series Handles
Plymouth Handleset
Plymouth w/ Keypad
Plymouth w/ Keypad
Wakefield
Sutton
Camelot
Camelot w/ Keypad
Kent
Monaco
Addison
Century
Ashcroft
Venice
Parthenon
Bowman
Chantilly
Florence
 
Monticello
Click on desired picture or radio button

Entrance Handle Specifications

Entrance Specifications

Printable Template for Schlage FA Series(Adobe PDF)
Printable Template for F Series (Adobe PDF)
Door Thickness
1-5/8" to 2" without thick door kit, up to 2-1/2" with thick door kit
Backset
Universal backset latch & deadbolt, fits either 2-3/8" or 2-3/4" backsets 
Strike
1 5/8" x 2 1/4" square corner, full lip, no box, latch strike & 1 1/8" square corner, box, deadbolt strike 
Bore
1-1/2" or 2-1/8" for deadbolt.  2-1/8" for handle.
Certification
ANSI A156.5, 2001, Grade 2 auxiliary lock 
Reinforcement
Door frame strike reinforcer with 3" screws 
Deadbolt
1" x 2 1/4" radius corner faceplate, 7/8" housing diameter, 1/2" throw springlatch with Triple-Option™ square corner and circular drive-in faceplates 
Cylinder
5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD) 
Warrarty Ten year mechanical warranty; limited lifetime finish warrany
Key
5-pin, C keyway
Escutcheon/Rose
Separate deadbolt and knob/lever roses on inside trim 
Hidden Screw Design FA Series: Screws are hidden behind rosettes and decore plates
F Series: N/A
Adjustable Through Bolt
Adjustable height; position of bottom bolt and be adjusted up or down from nomimal position by 3/4". Through-Bolt
Center-to-Center Distances For FA Series: Deadbolt and latch are at 5-1/2" centers for escutcheon models; Minimum 4" for sectional models. 9-1/8" Center-to-Center distance from latch to bottom retaining bolt.
For F Series: Deadbolt and latch minimum 4" from deadbolt to latch. Latch to bottom retaining bolt varies depending upon handle. See Printable Template for F Series (Adobe PDF) for more information.